NextNet Wireless Mobile Subscriber Unit, Руководство по установке

Страница: 10 / 16

4
I n s t a l l i n g t h e m o b i l e s u b s c r i b e r u n i t
Installing the antenna
You should only use the antenna that NextNet has approved for use with the MSU.
The antenna is installed on a horizontal surface on the exterior of the vehicle, usually on the
trunk or on a roof. To secure the antenna to the vehicle, you can use one of the following
mounting options:
• You can use a magnetic mount to secure the antenna to the vehicle.
• You can use a regular mount, which requires you to drill or use an existing hole through
the exterior of the vehicle.
After you install the antenna, run the antenna cable and connector to where the MSU is
installed.
Antenna requirements
This section explains which antennas can be used with the MSU.
Note: The antenna used with the MSU depends on the Effective Isotropic Radiated Power
(EIRP) requirements of the particular country in which the MSU is operated.
In the United States, the antennas approved for use with an MSU operating at 2.6 GHz are:
• The BMMG2400ML195C antenna from Maxrad, which is magnetically mounted to the
vehicle
• The IMAGO-2600 antenna from Mobilemark, which is magnetically mounted to the
vehicle.