Nexthop NH-3730-24F, Руководство по установке оборудования

Страница: 9 / 16

NH-3730-24F Hardware Installation Manual
Chapter 3 Switch Installation
This section explains the detail of NH-3730-24F Switch installation:
Warning:
Only qualified mechanics are allowed to install or replace the device.
3.1 Installation tools and devices
Tools and devices needed for NH-3730-24F switch are optional device.Users have to
buy according to their needs.The following tools and device are typical for
NH-3730-24F Switch:
z
screw driver
z
static ring
z
screws
z
ethernet Cable
z
other Ethernet terminal devices
z
console terminal
3.2 Switch Case Installation
Switches can be place on the table, mounting or other surfaces. To install your network
correctly, follow the steps in this section. The content includes:
3.2.1 Install on the desk
NH-3730-24F Switch can be placed on a smooth and safe desk.
Note:
Do not press on the switch. Any pressure more than 4.5kg may cause damage to switch.
3.2.2 Install on the mounting
Switches are mounted on the mounting with brackets.Fixed the mounting and the
switches face the front. Operate follows:
Mount the switch after the brackets are fixed. Refer to the following illustration:
- 7 -