4
Mode/Reset Button
By pressing the Mode/Reset Button for certain period of time, users can
perform the following tasks.
Change Port Status LED Mode
to read the port status correctly in the twodifferent modes
(Link/Act/Speed mode or PoE mode).
Reset the Switch
toreboot and get the switch back to the previous configuration
settings saved.
Restore the Switch to Factory Defaults
to restore the original factory default settings back to the switch.
Note
:
According to the table below, users can easily judge which taskisbeing
performed by reading the LED behaviors while pressing the Mode/Reset
button.
Once the LED behaviors are correctly displayed, users may
just release the button.
Table 4:Mode/Reset Button Descriptions
Task to
bePerformed
Time Period of
Pressing Button
SYS LED
Behavior
Port Status LED
Behavior
Change LED Mode
0 ~ 2 seconds
ON
Green
LED status will be
changed according the
mode selected.
Reset the Switch
2 ~ 7 seconds
Blinking
Green
ALL LEDs Light OFF
Restore to Defaults 7 ~ 12 seconds
Blinking
Green
ALL LEDsStay ON
