September 2018
Laser Engraving Guide | 8
•
This will place t
he laser head’s
white plastic shield about 0.100 inches above the
target material creating the correct position for max focal power of the laser.
•
Zero all axis again
•
The system is now ready to run your program.
•
Load the TAP file onto a USB flash drive.
o
NOTE: A SanDisk flash drive formatted to FAT32 are recommended.
•
Insert USB drive into either the CNC Shark or Piranha Pendant
•
Select the laser tap file created in Vcarve.
o
(tap file must be created with Laser Post Processor)
•
Make sure you are wearing your included red safety glasses
•
Select Run.
