September 2018
Laser Engraving Guide | 7
•
Connect laser head to laser hub
CNC Shark HD4 Controller CNC Piranha FX Controller
•
Connect one end of the 20 pin ribbon cable into the hub the other into the
controller.
•
Connect 12 V power laser supply to hub
•
Power on the CNC controller system
•
Power on the hub.
•
Key Switch to on
Alignment and positioning of laser head
•
Position the laser head by jogging the X and Y axis to the programs point of origin
(starting point).
•
Lower the head of the laser by using the jog buttons for the Z axis until the head it
lightly touching the work piece.
•
Press the Zero XYZ button to set this as the zero position
•
Next click the Z axis display to access the precise movement control
•
Enter 0 .1 into the display and press the red move button
