PARTS:
• • 2 x Seat Covers
• • 2 x M5 10mm Machine Screws
• • 2 x Plastic Caps
PARTS:
• • NIL
PARTS:
• • 1 x Seat Base
• • 1 x Right Arm Rest
• • 1 x Left Arm Rest
• • 8 x M8 25mm Bolts and Washers
PARTS:
• • 1 x Seat Backrest
• • 4 x M8 25mm Bolts and Washers
Video Instruction: bit.ly/nlrbuild
03
Align the mounting holes on the Side Cover with the threaded hole on the recliner plate. Bolt through
and secure with 1 x M5 Screw. Once assembled insert Plastic Cap.
04
For the following steps it is recommended to lay the chair in a flat surface as shown in the picture to
get access to underneath the chair.
01
Align the holes on the Arm Rests with the threaded inserts on the bottom of the Seat Base. Bolt
through and secure with 8 x M8 25mm Bolts and Washers.
02
Align the mounting holes on the Seat Backrest with the mounting holes on the Seat Base recliner
plates. Bolt through and secure with 4 x M8 25mm Bolts and Washers.
6
7
Repeat
on Other
Side
