23
Replacing Filters:
- Should filters wear out due to age and prolonged use, replace with
Aluminum Grease Filter (with Stainless steel forelock)
- Note: Also replace damaged filter that has punctured or broken mesh,
bent or broken frame.
Replacing the light bulb:
WARNING:
Disconnect the
hood from electricity and be sure
the lights are cool.
- Should the light bulb burn out
due to age or prolonged use,
replace with MAX 20W, 12V ,
JC type halogen bulb.
- If new lights do not operate, make sure the light bulb is inserted
correctly.
(1) Turn off the range hood.
(2) Make sure the lights are cool to touch, Use a flat hand screwdriver
or equivalent tool carefully turn the inner ring counter-clockwise
with to pop out the protective covering of the light.
(3) Gently pull out the defective bulb and discard accordingly.
(4) Install a new halogen light bulb and reverse the steps.
WARNING
Light bulb become extremely hot when turned on.
DO NOT touch bulb until switched off and cooled.
Touching hot bulbs could cause serious burns.
SEVERE INJURY
BURNS HAZARD
Rotating fan can cause severe injury. Stay clear of
fan when motor is running.
Halogen Light
Glass Cover
Light
Housing
Flat Headed
screwdriver
Halogen Light Bulb
12V 20W
Place Halogen Light
Glass Cover Back
