X2-CBMC-C BUOY-MOUNTED DATA LOGGER
QUICK START GUIDE
IMPORTANT - BEFORE FIELD DEPLOYMENT:
Completely configure new X2 systems with sensors and a web connec-
tion in a nearby work area. Operate the system for several hours and ensure correct sensor readings. Use this test run
to become familiar with the features and functions.
1
To get started:
a. Go to
WQDataLIVE.com
b. Create a new account or sign into an existing
account.
c. Choose or create the project that will contain
the data logger by selecting the Projects link
from the bottom right footer of the page.
d. Go to the ADMIN tab located at the top of the
project dashboard and click Settings.
2
From there, choose the Project/Site pull down
menu and select the site for the new data logger.
a. If a site has not been created, select New Site.
Create and save the site before entering the
claim code.
3
Enter the claim code listed below into the space
provided under Assigned Devices.
Click Add Device.
a. The new device should be visible in the
Assigned Devices list.
4
If cellular service is not purchased through
NexSens, visit the article link below for steps on
how to setup the cell modem.
a. nexsens.com/x2apn
5
Use the CONNECT software to ensure the proper
scripts are enabled for each sensor.
a. nexsens.com/conncss
6
Remove one blank sensor plug from an MCIL-8-
pin port (i.e., P0, P1, or P2) for each sensor.
a. Connect all sensors to the desired ports.
Note: Only one RS-232 sensor can be plugged into
each P0, P1, or P2 port, (i.e., either P0-A or P0-B.).
Ensure that all SDI-12 and RS-485 sensors have
unique addresses.
7
Overview
The X2-CBMC buoy-mounted data logger with cellular
telemetry includes an integrated modem. Five sensor
ports provide industry standard protocols including SDI-
12, RS-232, and RS-485. The SOLAR/COM port offers direct
communication (serial to PC) and power input. All con-
nections are made using MCIL/MCBH wet-mate connec-
tors. The X2-CBMC is powered from the CB-Series buoy’s
solar rechargeable battery reserve.
Data is accessed and stored on the WQData LIVE web
datacenter. An easy-to-use dashboard and built-in sensor
library automatically facilitate setup and configuration.
What’s Included?
(1) X2-CBMC buoy-mounted data logger
(5) Sensor port plugs
(1) Power port plug
(1) Wireless antenna (installed on telemetry units only)
(1) Quick start guide
Figure 1:
X2-CBMC Buoy-Mounted Data Logger
