Revision history
This section lists updates and new material added to
Nexsan High-Density Storage User Guide
.
P04050147, Rev B, March 2017
Revised and promoted the procedure
on page 203, and cross referenced it from
related sections in other parts of the document.
Added a subheading and introduction to emphasize the section about backing up or changing an encryption
key for encrypted arrays. See
Back Up or Change an Encryption Key
P04050147, Rev A, July 2016
Changed document number to part number
Added Information for E60P and E48P
Added information about restoring encryption keys
NXS-BBES-UG, Rev. 05, November 2015
Changed name of document to
Nexsan High-Density Storage User Guide
Removed all references to SATABeast and SATABoy
Updated all pertinent sections with information on the BEAST BT60 and BT60X units
Updated
on page 57 to reflect changes made in most recent firmware release
NXS-BBES-UG, Rev. 04, September 2015
Added section
on page 120, and also added descriptions of new disk icons to
on page 57 and
Added instructions for creating encrypted arrays on self-encrypting disks (SEDs) to
on page 41 and
Updated
Array Status/Health
section of
on page 62 to reflect array encryption status
Added new item,
Encryption
, to the
Disk Information
detail pages in
Updated sections
and
on page 207 with new encrypted array information
Updated section
on page 192 to include ability to turn off audible alarms
Updated formatting throughout with new single-page layout
NXS-BBES-UG, Rev. 03, May 2015
Added to the list of
Updated terms used in on the
Configure Time and Date
page in
on page 28 and
Added new item,
Used capacity
, to the
RAID Information
page in
Added new item,
Disk health
, to the
Disk Information
detail pages in
Updated
on page 77 to include the disk health measurement for SSD disks
Added new item,
Javascript hot tracking
, to the
GUI Settings
section of
Revision history
Nexsan High-Density Storage
User Guide
xii