Create a new RAID array
If you need to create additional RAID arrays after initial setup (see
on page 22), do the
following:
►
To create a new RAID array:
1. Click
Configure RAID
in the left navigation bar to go to the
Create a New RAID Array
page.
If your Nexsan High-Density Storage system has an attached expansion unit, you are first prompted to
select which unit the new RAID array will be built on.
Figure 2-3:
Create a New RAID Array
enclosure selection page
Select the enclosure and click
Next
to be taken to the array creation tool.
Once you have selected the desired enclosure, or if your Nexsan storage system is a single unit, the
array creation tool is displayed.
Figure 2-4:
Create a New RAID Array
page
Chapter 2: Common Tasks — Create a new RAID array
Nexsan High-Density Storage
User Guide
41