34
To update your scan tool, you need the following items.
1.Scan tool
2.A PC or laptop with USB ports. (Support only official version
windows XP-10, 32/64 Bits OS)
3.USB cable
Steps:
1) Download and install the applications from our website:
www.nexpeaktech.com
2) Run UPLINK.exe in your computer (Mac OS does not compatible)
3) Press and hold any button until the USB cable is connected with
computer and Release it after the scan tool displays a message
"Update Mode"
4) Return to the UPLINK software, click" Check update" button, will
download the upgrade file from internet then update to scan tool
automatically.
5) Wait for few minutes until update succeed.
6) During the update procedure, please do not disconnect the usb
connection.
7) Restart the scan tool to finish the whole update.
Please ignore the Microsoft Modem drivers install failure if you are not using windows XP system.
Device Driver Installation Wizard
Completing the Device Driver
Installation Wizard
Some drivers were successfully installed on this computer.Some
could not be installed.See the Status column for more details.
if a device came with your software,you can now connect it to this
computer.
For devices where no driver was installed.contact your device
vendor.
Drvier Name
Status
Microsoft Modem (06/21/2006 6.1.7601.17514) Install fai
STMicroelectronics (usbser) Ports (04/25/2010... Ready to
< Back
Finish
Cancel
NOTE
: When you made a wrong choice and the scan tool is unable to
work properly, you may need to update the programs. To hold LEFT
scroll button and power on the scan tool, you will enter the update
mode forcedly. Then follow the update procedure to refresh the
program.
