Nexo Geo M6 Series, Системное руководство

Страница: 34 / 64

GEO M6 HARDWARE SETUP PROCEDURE
Page 34 / 64
System Manual GEOM6
4 to 12 (maximum) GEO M6 flown
Required items
- 1 or 2 hoists (not provided).
- 1 x GMT-BUMPER
- 1 x GMT-EXBAR for extended positive and negative bumper angles
- 4 VXT-BL515 per GEO M6
- 1 x GMT-6CASE for 6 x GEO M6
IMPORTANT
Maximum GEO M6 quantity for flown vertical cluster is 12 (and eventually less).
Please check NS-1 for mechanical Safety Working Load and acoustic computations.
IMPORTANT
Please check configuration in NS-1 for proper motor hoist rating
Procedure with flight case set vertically
- Tip the flight case vertically
- Remove upper cover to access to top cabinet rigging points
- Connect GMT-BUMPER to top cabinet 4 x VXT-BL515 quick release pins
- If required, connect GMT-EXBAR to GMT-BUMPER by inserting EXBAR clevis pins into GMT-
BUMPER “B” and “D” holes
- Connect single hoist to required hole as indicated in NS-1 design
o
“A”, “B”, “C”, “D” or “E” on GMT-BUMPER
o
Or “1” to “9” if using GMT-EXBAR
o
If using 2 hoists, connect these using extreme points
(
“A” and “E”, or “A” and “9” or “”9” and “E”)
GMT-BUMPER and GMT-EXBAR referenced rigging points
IMPORTANT
Ensure hoist hook(s) is (are) properly secured to GMT-BUMPER