Nexo Geo M6 Series, Системное руководство

Страница: 26 / 64

GEO M6 HARDWARE SETUP PROCEDURE
Page 26 / 64
System Manual GEOM6
1 to 3 (maximum) GEO M6 wall mounted
Required items
- 1 x VNI-WS15
- 1 x GMT-LBUMP
- 1 to 3 GMI-BNFIX
- 3 x 12mm diameter screws (not provided)
IMPORTANT
Ensure that the wall is strong enough to hold 4 times GEO M6 cluster weight and that the 12 mm diameter
screws and corresponding plugs required to fix the VNI-WS15 on the wall are properly dimensioned.
Procedure
- 3 x 12mm diameter screws (not provided) are required to fix the VNI-WS15 support to the wall;
- Connect GMT-LBUMP to top cabinet by inserting the GMI-BNFIX axis through front holes and secure axis and rear link
with GMI-BNFIX screws;
- Connect subsequent cabinets with appropriate inter-angle values;
- Connect the VNI-WS15 suspension plate to the GMT-LBUMP by using the M6x20 screws provided with the GMT-LBUMP
NB: please do not use the screws supplied with VNI-WS15, too long for this application case
- Position the 6x20 screws in the oblong hole so that required vertical angle is obtained
- Secure the screws with Loctite 243 or equivalent
- Suspend to the wall suspension using the shoulder screws supplied with VNI-WS15
- Secure the assembly with the VNI-WS15 safety cable
- Adjust horizontal angle