Page 6/17
GEOM10
– ACCESSORIES
4
GEOM10
–
ACCESSORIES
Warnings
All GEOM10 accessories are specifically rated in agreement with structural computations.
Never use other accessories
– including push-pins – when assembling GEOM10 cabinets than the ones provided by
NEXO: NEXO will decline responsibility over the entire GEOM10 accessory range if any component is purchased from
different supplier.
All GEOM10 accessories have been designed so that cabinet are arrayed vertically.
GEOM10 horizontal assemblies as shown in figure below are UNSAFE and STRICTLY PROHIBITED
VNT-BUMPM10
-
Rated for a maximum of 12 GEOM10 or 8 MSUB15.
-
Maximum quantity for flown vertical cluster is:
N
GEOM10
+ 1.5*N
MSUB15
<= 12
-
2 rigging points 2 points with retractable rings.
-
Usable with VNT-EXBARM10 for a one rigging point.
-
Ground stack assembly alone, or with VNT-GSTKM10S /
VNT-GSTKM10L.
-
2 locations for laser/ inclinometer.
-
On each side, an arrow indicates the front.
VNT-EXBARM10
Negative tilt
Positive tilt
