Nexnovo XT Series, Инструкция по установке и эксплуатации

Страница: 3 / 19

Protection From
Electric Shock
Safety Information
Read below safety information before
powering or servicing this product. Warning！
The following symbols are used to identify important safety information on the
product and in this manual:
Safety information Protection from
electric shock
Protection from fire Protection from injury Power system
Safety Information
Important Warnings
Hot surface
NS Poster should be installed under the guidance of professional technician.
This product presents risks of severe injury or death due to fire hazards, electric shock.
Safety Information: Read this manual closely before installing, powering or servicing this product,
follow the safety precautions listed below and observe all warnings in this manual and printed on the
product.
Amateur serviceman are not allowed to open cabinet and dismantle accessories inside.
If you have questions about how to operate the panel safely, please contact your supplier.
Connect the product to AC mains power within the range 90- 264 V nominal at 50 or 60 Hz only.
Always ground (earth) the product electrically.
Before using the product, check that all power distribution equipment and cables are in perfect
condition and rated for the current requirements of all connected devices.
Do not use the product if the power cable or a power plug is in any way damaged, defective or showing
signs of overheating.
Do not attempt to open any cover.
Refer any service operation not described in this manual to a qualified technician.
Protection From Injury
Important Warnings
Power System
Protection From
Injury
Power System
Protection From Fire
Protection From Fire
Do not stick filters, masks or other materials directly onto LED modules.
Do not retool the product in any way not described in this manual.
Install only genuine NEXNOVO parts in or on the product unless an alternative is described in this
manual.
This product is only suitable for indoor installations behind the retail window instead of overheating
outdoor environment.
When setting up the XT poster,please ensure it is fixed very securely so that children can hardly move
the poster.
Maximum and Minimum Ambient Temperature:
The maximum ambient temperature for the LED wall is 50 °C; the minimum temperature is -20 °C.
High leakage current:
In order to avoid risk of electric shock due to high leakage current, proper grounding of the installation
is required.
Before operation,please check and ensure power cord and connector are intact.
Protection from water:
This product is not waterproof and prohibited to be used at water-pouring places.
Mains cords:
They are not user Serviceable. If the power cords are damaged, replace them
only with new ones. New power cord is required to bear at least 1600W load.
Data cables:
The data cables provided with this system have special properties for safety.
They are not user serviceable. If the data cables are damaged, replace them
only with new ones. Never try to repair a data cable.The length of a data cable must not
exceed 100 m (332 feet). Avoid exposure of data cables to accidental contact
with lightning or power conductors.