manualshive.com logo in svg

NEXIQ Technologies 121052, Инструкция по установке и настройке

Поделиться
Скачать
NEXIQ Technologies 121052 Скачать руководство пользователя страница 2

USB-Link™ 3 Installation and Setup Manual

USB-Link

TM

 3: Wireless and Wired Editions

IDSC Holdings LLC retains all ownership rights to USB-Link™ 3 and its documentation. The USB-Link™ 3 source code is a confidential 
trade secret of IDSC Holdings LLC. You may not decipher or de-compile USB-Link™ 3, develop source code for USB-Link™ 3, or 
knowingly allow others to do so. The USB-Link™ 3 and its documentation may not be sublicensed or transferred without the prior written 
consent of IDSC Holdings LLC.
This manual, as well as the software it describes, is furnished under license and may only be used or copied in accordance with the 
terms of such license. The content of this manual is furnished for informational use only, is subject to change without notice, and should 
not be construed as a commitment by IDSC Holdings LLC. IDSC Holdings LLC assumes no responsibility or liability for any errors or 
inaccuracies that may appear in this book.
Except as permitted by such license, no part of this publication may be reproduced, or transmitted, in any form or by any means, 
electronic, mechanical, or otherwise, without the prior written permission of IDSC Holdings LLC. 

NEXIQ Technologies and USB-Link are trademarks of IDSC Holdings LLC.

©2022 IDSC Holdings LLC. All rights reserved. All other marks are trademarks or registered trademarks of the respective holders. 
Pictures for illustration purposes only. Specifications are subject to change without notice.

www.nexiq.com

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not 
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired 
operation. This device contains FCC-ID POOWML-C30XX.

Approved in accordance to R&TTE directive transmitter module marked by “CE product label”, manufactured by MITSUMI incorporated 
to OEM product.

Part No. 

ZEESM611AW

 Revised 08/10/2022

Содержание 121052






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды