Nexgrill 820-0072, Руководство пользователя

Страница: 11 / 64

10
CONNECTION INSTRUCTIONS
LIQUEFIED PETROLEUM GAS CYLINDER REQUIREMENTS
LPG CYLINDER
Only use cylinders with a minimum capacity of 5 kg and a maximum capacity of 15 kg. A tank of
approximately 318 mm (12.5 in) in diameter by 580 mm (22.8 in) in height shall be the maximum
size LPG cylinder which can be used.
A dented or rusty LPG cylinder may be hazardous and should be checked by your supplier. Never
use a cylinder with a damaged valve. The LPG supply cylinder to be used must be constructed and
marked in accordance with the specifications for LPG cylinders that adhere to national regulations
for the country of use. The gas cylinder must have a shut-off valve terminating at the valve outlet.
Storage of an outdoor cooking gas appliance indoors is permissible only if the cylinder is
disconnected and removed from the outdoor cooking gas appliance. The cylinder system must be
arranged for vapour withdrawal. The cylinder must include a collar to protect the cylinder valve.
The LPG cylinder must be fitted with an overfill protection device (OPD).
If fitted, remove the plastic valve cover from the LPG cylinder. Make sure the grill's gas hose does
not contact the grease pan or grill firebox when the LPG cylinder is positioned.
GAS HOOK-UP
Only the pressure regulator and hose assembly supplied with the grill should be used. Make sure the hose is not subjected
to twisting. Any replacement pressure regulator and hose assembly should comply with EN 16129:2013 and the national
regulation. The flexible hose used, with a length not exceeding 1.50 meters, should comply with EN 16436-1:2014. This grill
is configured for liquefied petroleum gas. Do not use a natural gas supply.
Periodic routine inspection of the regulator hose assembly should be performed at least once per year to discover potential
wear, deterioration, or damage that could allow gas to leak. We recommend replacement of the regulator hose assembly
every five (5) years, or sooner if wear, deterioration, or damage is discovered.
Total gas consumption (per hour) with all burners set on “HIGH”:
EACH BURNER 2.00 kW
TOTAL 4.00 kW
WARNING:
NEVER ATTEMPT TO USE DAMAGED OR OBSTRUCTED EQUIPMENT. SEE YOUR LOCAL LIQUEFIED
PETROLEUM GAS DEALER FOR REPAIR.
REPLACING THE LIQUEFIED PETROLEUM GAS CYLINDER
Turn the grill burner knobs clockwise to “OFF” (  ) and make sure the grill is cool.
Turn the gas supply off at source and disconnect regulator from cylinder. Refer
to "TURNING OFF YOUR GRILL AND DISCONNECTING REGULATOR" section of
manual for detailed disconnecting the regulator instructions.
Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only
install the type of dust cap on the cylinder valve outlet that is provided with the
cylinder valve. Other types of caps or plugs may result in leakage of gas.
CONNECTING THE LIQUEFIED PETROLEUM GAS CYLINDER
318 mm (maximum)
580 mm (maximum)