background image

WARNING

A strong gas smell, or the hissing sound of gas 
indicates a serious problem with your gas grill or 
the LP gas tank. Failure to immediately follow the 
steps listed below could result in a fire or 
explosion that could cause serious bodily injury, 
death, or property damage.

ƒ

Shut off gas supply to the gas grill.

ƒ

Turn the control knobs to OFF position.

ƒ

Put out any flame with a proper fire   

extinguisher.

ƒ

Open grill lid.

ƒ

Get away from the LP gas tank.

ƒ

Do not try to fix the problem yourself.

ƒ

If odor continues or you have a fire you can not 

extinguish, call your fire department. Do not call 
near the LP gas tank because your telephone is 
a form of electrical device and could create a 
spark resulting in fire and/or explosion.

CAUTION

:

Spiders and small insects occasionally 

spin webs or make nests in the grill burner tubes 
during transit and warehousing. These webs can lead 
to gas flow obstruction which could result in a fire in 
and around burner tubes. This type of fire is known as 
“FLASH-BACK” and can cause serious damage to 
your grill and create an unsafe operating condition for 
the user.

Although an obstructed burner tube is not the only 
cause of “FLASH-BACK”, it is the most common 
cause.

To reduce the chance of “FLASH-BACK”, you must 
clean the burner tubes before assembling your grill, 
and at least once a month in late summer or early fall 
when spiders are most active. Also perform this 
burner tube cleaning procedure if your grill has not 
been used for an extended period of time.

See Cleaning Burner Tubes and Ports on page #21.

NOTE

: The normal flow of gas through the pressure 

regulator and hose assembly can create a humming 
noise. A low volume of noise is perfectly normal and 
will not interfere with operation of the grill. If humming 
noise is loud and excessive you may need to purge 
air from the gas line or reset the pressure regulator 
excess gas flow device. This purging procedure 
should be done every time a new LP gas tank is 
connected to your grill. For help with this procedure 
refer to page 20, item 4 of “If Grill Still Fails To Light”, 
or call the Grill Information Center at 1-800-913-8999.

Visually check the burner flames prior to each use. The 
flames should look like picture, if they do not, refer to the 
Cleaning Burner Tubes and Burner Ports, see page 21 of 
this manual.

4

CAUTION: Beware of Flash-Back

Burner Flame Check

Содержание 720-0783C

























Отзывы: