11
6.
Condiment Tray Assembly
Use four 5/32-in. x 10-mm Truss Head
Screws (AA) and four 5/32-in. Locking
Washers (BB) to attach the Condiment
Tray (T) to the Cart Leg, Front Left (F)
and Cart Leg, Front Right (I). Use two
5/32-in. x 10-mm Truss Head Screws (AA)
And two 5/32-in. nut (II) to secure underside
Of the Comdiment Tray. As shown in Fig. 8.
Hint: The Condiment Tray (T) will sit
above Front Panel (S) as shown in
Fig. 8. Be sure the Condiment Tray (T)
opening is facing outward towards the
front of the grill.
7.
Diagonal Bar Barrier
Use one 5/32-in. x 10-mm Truss Head
Screw (AA) and one 5/32-in. Nut (II) to
secure one side of the Diagonal Bar
Barrier (Y) to the underside of the
Condiment Tray (T). Use one 5/32-in.
x 10-mm Truss Head Screw (AA) and one
5/32-in. Locking Washer (BB) to assemble
the other side of the Diagonal Bar Barrier (Y)
to the Bottom Panel (B). As shown in Fig. 9.
8.
Cart Beam Assembly
Using four 5/32-in. x 10-mm Truss Head
Screws (AA) and four 5/32-in. Locking
Washers
(BB) to connect the Cart Beam(R)
to Cart Leg, Back Left (G) and Cart Leg,
Back Right (J). As shown in Fig. 10.
NOTE: Smooth side of Cart Beam (R) should
face away from cart.
9.
Firebox Assembly
a) Remove the Firebox Assembly (A)
from the carton and carefully place
onto the grill cart. Lid handle will face
front and be above Condiment Tray (T).
As shown in Fig.11.
NOTE: We suggest two persons lift
the firebox when assembling. Be sure
the hose and regulator are place inside
the cart when placing Firebox (A). Be
sure to remove all packaging material during assembly.
8 0 0
7 0 0
6 0 0
5 0 0
4 0 0
3 0 0
2 0 0
1 0 0
Fig. 8
Fig. 9
Fig. 11
S
AA
BB
R
A
T
Fig. 10
AA
BB
F
I
J
G
T
AA
II
AA
T
II
Y
B
AA
BB
UnRegister
ed
