5/32x2/5”
1/4x3/5”
Installing Side Burner
1. Attach side burner to grill cart by using (4) 1/4 x
3/5" Phillips head screws with (4) 1/4” lock
washers. Then use (1) 5/32 x 2/5” Phillips head
screw and (1) 5/32” lock washer to attach side
burner control panel to main control panel. (Fig.10)
2. Attach gas line to side burner. Then, remove the
nut from the orifices at the end of the gas line (Fig.
10a). Insert the orifices thru the bracket for side
burner. (Fig.10b) Secure the orifices using the nut
removed during step 1.
3. Plug ignition wire into electrode under the side
burner. (Fig.10c)
Installing Side Shelf
1. Attach side shelf by using (4) 1/4 x 3/5" Phillips
head screw with (4) 1/4” lock washers. Then use
(1) 5/32 x 2/5” Phillips head screw and (1) 5/32”
lock washer to attach the side shelf control panel
to main control panel. (Fig.11).
Figure 12
Figure 10
Figure 11
Installing Grease Tray
1. Insert grease tray assembly into opening on
backside of grill. Make sure to slide tray onto
tracks as illustrated and that the grease cup is on
the right hand side from the back. Using (2) 5/32
x 2/5" Phillips head screw and (2) 5/32” nuts with
(2) 5/32” lock washer attach the tank heat shield.
(Fig.12)
2. When you have finished assembling grill,
make sure that all screws and nuts are tight and
secure.
10
1/4x3/5”
5/32x2/5”
Figure 10a
Figure 10b
Figure 10c
