26
Rear Burner Lighting Illustration :
Push and turn Rear Burner knob slowly to
IGNITE/ON. Hold in until the burner is lit.
Once it is lit, continue to press and hold for
another 15 seconds to ensure the burner
stays lit. If burner does not light up, turn the
knob to OFF and repeat the lighting
procedure. If burner does not light up after
second attempt, turn the knob OFF, wait
for 5 minutes, and repeat the lighting
procedure or light by match.
Sear Burner Lighting Illustration:
Push and turn the Sear Burner knob slowly
to IGNITE/ON. If burner does not light up,
turn the knob to OFF and repeat lighting
procedure. If burner does not light up after
second attempt, turn the knob OFF, wait 5
minutes and repeat lighting procedure or
light by match.
Main & Side Burner Lighting Illustration:
Step 1.
Make sure the Lid is open
Step 2.
Push and turn main burner knobs to “IGNITE/HI” position.
Pilot torch will light. Hold for 3-4 seconds until burner is lit.
Step 3.
You may need to try 3 or 4 times to light the burner. After
the burner is lit, adjust the knob as desired.
Lighting Illustration
