11
Side burner valve assembly:
Step 1: Insert valve assembly through side Step 2: Remove 4(four) screws & washers
panel from the “U” brackets on the side
burner
Step 3: Insert valve stem assembly into burner Step 4: Insert valve stem assembly through knob
venturi hole to the control panel
Step 5: Replace “U” brackets with 4(four) Step 6: Align & tighten knob bezel & valve
Screws ( DO NOT TIGHTEN) stem with 2(two) screws & washers
as shown below.
Step 7: Tight all 4(four) screws on the “U” Step 8: Place knob on valve stem, then screw
brackets on the burner, then connect the knob by using the wrench tool.
the ignition wire on to valve.
(#22)
(Side panel, right #29)
Valve
(Control panel #22)
Valve
Valve stem
(Knob bezel in bag)
#22
(Wrench tool enclosed in bag)
Ignition wire
Содержание 720-0323
