Nexgrill 720-0133-NG, Инструкция по использованию и уходу

Страница: 19 / 35

GRILL LIGHTING INSTRUCTIONS
FLAME CHARACTERISTICS
Check for proper burner flame
characteristics. Each burner is adjusted
prior to shipment; however, variations in
the local gas supply may make minor
adjustments necessary.
Burner flames should be blue and stable
with no yellow tips, excessive noise, or
lifting. If any of these conditions exist
call our customer service line. If the
flame is yellow, it indicates insufficient
air. If the flame is noisy and tends to lift
away from the burner, it indicates too
much air.
TO MATCH LIGHT THE GRILL
If the burner will not light after several
attempts then the burner can be match lit.
Use of match light extension rod
Use this device to match light your
burners
Simply place a lighted match between the
coils on the end of the extension rod and
hold next to the burner to ignite. (see
reference Pg16)
If you’ve just attempted to light the
burner with the igniter, allow 5 minutes
for any accumulated gas to dissipate.
Keep your face
and hands as far away from the grill as
possible. Insert a lit match attached to lighting
rod through the cooking
grids to the burner.(see next page) Press the
control knob and rotate left to the HI setting,
continue to press the knob until the burner
ignites. Burner should light immediately. If
the burner does not light in 4 seconds turn the
knob off, wait 5 minutes and try again.
Keep a spray bottle of soapy water near the
gas supply valve and check the connections
before each use.
Do not attempt to light the grill if odor of
gas is present. Call for service 1-800-648-
5864.
17