Nexgrill 4QW3520000010, Руководство пользователя

Страница: 11 / 28

Fig. 7
Fig. 8
I S
T
F
5. Condiment Tray Assembly
a) Remove the screws which are pre-assembled
on the Front Panel (S),attach the condiment
tray (T) to Cart Leg, Front Left (F) and Cart
Leg, Front Right (I) by loosening the two screws
in the each cart leg. Align the holes of the Condiment
Tray (T) with the screws. Note there are two tabs
that align the Front Panel (S) and the Condiment
Tray (T). As shown in Fig. 7.
b) Tighten the cart legs screws that were loosened in
step 5a.
c) Replace the left and right screws. Remove from Front
Panel (S) in step 5a. Place them through the holes on
Condiment Tray (T) into Front Panel (S).
Note: Middle screw will be used during step 8.
T
F
N
6. Fix Bar Assembly
Loosen the screw which is pre-assembled
at the rear of the Cart Leg Front Left (F), then place
the Fix Bar (N) in the pre-drilled hole on the left side of
the Condiment Tray (T). Push all the way in and then
place right side of Fix Bar (N) into the pre-drilled hole
on the right side of the Condiment Tray (T). Push Fix Bar
(N) all the way to the right and then tighten the
pre-assemble screw located at the rear of Cart Leg,
Front Left (F).
Fig. 9
7. Wheel Assembly
J
C
I
a) Remove the nuts and washers which are
pre-assembled on the short axle, place the
wheels (C) on the Axle which stable in the
Cart Leg, Front Right (I) and Cart Leg, Back
Right (J). As shown in Fig. 9.
b) Place washers and nuts to the axle and tighten
the nuts.
11