Nexersys Fast Fists Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 46

Nexersys Fast Fists Скачать руководство пользователя страница 15

Nexersys Fast Fists Home – Installation Tips

Here are some tips that may assist you when installing the TV Shop's Fast Fists products.

1) This photo shows a part that is included with the product but is not shown
anywhere in the assembly manuals of some early model machines.

Part Fitted

a) The 2nd photo shows where this part is to be fitted to the machine.

b) The assembly manual contained in the “Product Information” library on the Leisuretek
website shows this part on pages 13 & 14.

2) The machine comes with 2 power supplies. (USA & Australia)

- The Australian power supply is not compatible with the power cable that is pre-installed in
the mast (ie. The cable that runs up the inside of the mast from bottom to top)

- The Australian power lead plugs directly into the CPU and Monitor (using the splitter
cable supplied) and just hangs down the back of the machine.
(Secure it with a black cable tie if you have one, to make it look a bit neater)

NB: Some machines come with 3 power supplies. ie. Those mentioned above plus a
2

nd

Australian unit supplied in the main box of the machine, inside the bag

containing Plate #4 and the 2x Rubber Gaskets #5.

This one DOES fit the cable that

is pre-installed in the mast and should be used if supplied.

3) The supplied SD Card contains all of the software (ie. Operating System).

- If this is not inserted correctly, the machine will not turn on.

4) During the boot-up sequence, it will prompt you for some inputs.

- It's not a touch-screen. The pads are the buttons! Push/punch the pads!

- The initial boot-up sequence asks you to check the machine’s Serial Number and select
the correct Model.

Be sure to select the correct Model because an incorrect Model

selection is NOT REVERSIBLE and may render the machine inoperative!!

«
...
13
14
15
16
17
...
»

Содержание Fast Fists















































Отзывы:

Нет отзывов