4
FORM NO. L-20070-C-0501
PARTS REPLACEMENT
FRICTION FACINGS
1.
Remove the six Socket Head Cap Screws (Item 14)
and Lock Washers (Item 18) (See Figure 2).
2.
Remove the old split Friction Facing (Item 4) (See
Figure 2).
3.
Install the new split Friction Facing (Item 4) and
secure it with six new Socket Head Cap Screws
(Item 14) and Lock Washers (Item 18).
FIGURE 2
14,18
4
14,18
4
1.
Remove the Retaining Ring (Item 10) (See Figure 3).
Special attention should be exercised when
working with retaining rings. Always wear
safety goggles when working with spring or
tension loaded fasteners or devices.
2.
Press the Friction Disc Hub (Item 1) out of the Ball
Bearing (Item 8) (See Figure 3).
3.
Alternately and evenly remove the three old Shoulder
Screws (Item 16) and old Return Springs (Item 17)
(See Figure 3).
BALL BEARING, O-RING SEAL, AND RETURN SPRINGS
