background image

1

FORM NO. L-20070-C-0501

INTRODUCTION

Read this manual carefully, making full use of its explanations and instructions.  The “Know How” of safe, continuous,
trouble-free operation depends on the degree of your understanding of the system and your willingness to keep all
components in proper operating condition.  Pay particular attention to all NOTES, CAUTIONS, and WARNINGS to avoid
the risk of personal injury or property damage.  It is important to understand that these NOTES, CAUTIONS, and
WARNINGS are not exhaustive.  Nexen cannot possibly know or evaluate all conceivable methods in which service may
be performed, or the possible hazardous consequences of each method.  Accordingly, anyone who uses a procedure
that is not recommended by Nexen must first satisfy themselves that neither their safety or the safety of the product will
be jeopardized by the service method selected.

CAUTION

This unit has rotating parts.  Nexen recommends using a guard that will not restrict
the flow of cooling air around the unit if the unit is installed where injury to an oper-
ator could occur.  Contact your local Nexen Distributor for information about guards
designed for ''Air Champ'' brakes.

Содержание AIR CHAMP W-1000











Отзывы: