Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved
5
VMC 1000 User Manual
Chapter 1: Product Introduction
•
Shut down system automatically when the system’s internal temperature
is over 80C.
•
VMC 1000 will automatically shut down 5 minutes after the duration
of low battery voltage is over 60 sec. User can detect this situation via
software.
•
If the ignition is off and the system is still on after 3 minutes, VMC 1000
will shut down automatically.
•
If the ignition is off, the user can detect this status via the software.
•
If the ignition is turned on again and the power-off delay is in progress,
VMC 1000 will cancel the delay function and will continue to operate
normally.
•
If the ignition is turned on again and the power-off delay ended, VMC 1000
will shut down completely will power-on again automatically.
•
If the ignition is turned off again and power-on delay is in progress, VMC
1000 will cancel the delay and stay in power-off status.
•
If the ignition is turned off again and the power-on delay ended (in BIOS
process), VMC 1000 will shut down immediately.
•
If VMC 1000 is off, only below 10mA is used.
