Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
36
PEAK 779VL2 User Manual
Chapter 3: BIOS Setup
Graphics Configuration
Save & Exit
Advanced
Chipset
Boot
Security
Main
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select which of IGFX/PEG/PCI
Graphics device should be
Primary Display Or select SG
for Switchable Gfx.
Graphics Configuration
Primary Display
Internal Graphics
GTT Size
DVMT Pre-Allocated
DVMT Total Gfx Mem
Primary IGFX Boot Display
[Auto]
[Auto]
[2MB]
[64M]
[256M]
[VBIOS Default]
Primary Display
Select which of IGFX/PEG/PCI graphics device should be primary display or
select SG for switchable GFx.
Internal Graphics
Keep IGD enabled based on the setup options.
GTT Size
Configures the GTT size
DVMT Pre-Allocated
Configures the DVMT 5.0 pre-allocated (fixed) graphics memory size used
by the internal graphics device.
DVMT Total Gfx Mem
Configures the DVMT5.0 Total Graphic Memory size used by the internal
graphics device.
Primary IGFX Boot Display
Select the Video Device which will be activated during POST. This has no
effect if external graphics is present. Secondary boot display selection will
appear based on your selection. VGA modes will be supported only on
primary display. The options are VBIOS Default, CRT and DP/HDMI/DVI.
