Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
45
NISE 50C User Manual
Chapter 4: BIOS Setup
Serial Port Console Redirection
This section is used to configure serial port console redirection settings.
Console Redirection
Enables or disables the console redirection. When enabled, Console
Redirection Settings will be available.
Console Redirection (Serial Port for Out-of-Band Management)
Enables or disables the console redirection. When enabled, Console
Redirection Settings will be available.
Advanced
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Console Redirection Enable or
Disable.
COM0
Console Redirection
Console Redirection Settings
Serial Port for Out-of-Band Management/
Windows Emergency Management Services (EMS)
Console Redirection
Console Redirection Settings
[Disabled]
[Disabled]
►
►
CPU Configuration
This section is used to configure the CPU.
Advanced
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Socket specific CPU Information
CPU Configuration
Socket 0 CPU Information
CPU Speed
64-bit
Active Processor Cores
Limit CPUID Maximum
Execute Disable Bit
Intel Virtualization Technology
1467 MHz
Supported
[All]
[Disabled]
[Enabled]
[Enabled]
Active Processors Cores
Select the number of cores to enable in each processor package.
Limit CPUID Maximum
The CPUID instruction of some newer CPUs will return a value greater
than 3. The default is Disabled because this problem does not exist in the
Windows series operating systems. If you are using an operating system
other than Windows, this problem may occur. To avoid this problem, enable
this field to limit the return value to 3 or lesser than 3.
