Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.
37
Neu-X101 User Manual
Chapter 4: BIOS Setup
CPU Configuration
This section is used to view CPU status and configure CPU parameters.
Active Processor Cores
Select the number of cores to enable in each processor package.
Intel
®
Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional
hardware capabilities provided by Vanderpool Technology.
VT-d
Enables or disables VT-d function on MCH.
P-STATE Coordination
Configures the P-STATE coordination type.
Exit
Advanced
Chipset
PCIPnP
Security
Main
Version 2.18.1263. Copyright (C) 2021 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Socket specific CPU Information
CPU Configuration
Socket 0 CPU Information
Speed
64-bit
CPU Power Management
Active Processor Cores
Intel Virtualization Technology
VT-d
P-STATE Coordination
1500 MHz
Supported
[Disabled]
[Disabled]
[Disabled]
[HW_ALL]
S5 RTC Wake Settings
This section is used to configure the system to wake from S5 using RTC alarm.
Exit
Advanced
Chipset
PCIPnP
Security
Main
Version 2.18.1263. Copyright (C) 2021 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or disable System wake
on alarm event. Select
FixedTime, system will wake on
the hr::min::sec specified.
Select DynamicTime , System
will wake on the current time
+ Increase minute(s)
Wake system from S5
[Disabled]
Wake system from S5
Enables or disables system wake on alarm event. When FixedTime is selected,
system will wake on the hr::min::sec specified. When DynamicTime is
selected, system will wake on the current time + Increase minute(s).
