Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
29
NDiS B426 User Manual
Chapter 4: BIOS Setup
Advanced
Power
Security
Save
&
Exit
Main
Version 2.17.1254. Copyright (C) 2016 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F7: Discard Changes
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Configure Resume BY LAN
APM Configuration
Wake Up On Lan
Power On RTC Alarm
RTC Alarm Date
RTC Alarm Hour
RTC Alarm Minute
RTC Alarm Second
AC Power Loss
Watch Dog
[Enabled]
[Enabled]
0
0
0
0
[Power On]
[Disabled]
APM Configuration
Wake up on LAN
Enables or disable the system to wake up on LAN.
Power on RTC Alarm
Enables or disables the system to wake up on RTC alarm. When enabled, the
system will wake on the hr::min::sec specified.
RTC Alarm Date, Hour, Minute and Second
Configures the date and time of the RTC alarm.
AC Power Loss
Power Off
When power returns after an AC power failure, the
system’s power is off. You must press the power button to
power-on the system.
Power On
When power returns after an AC power failure, the system
will automatically power-on.
Last State
When power returns after an AC power failure, the
system will return to the state where you left off before
power failure occurs. If the system’s power is off when
AC power failure occurs, it will remain off when
power returns. If the system’s power is on when
AC power failure occurs, the system will power-on when
power
returns.
Watchdog
Enables or disables the watchdog function.
