Nexcom NDiS B338 Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 61

Nexcom NDiS B338 Скачать руководство пользователя страница 52

Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.

38

NDiS B338 User Manual

Chapter 4: BIOS Setup

SATA Configuration

This section displays information of the SATA drives.

Advanced

Version 2.22.1282 Copyright (C) 2022 AMI

Aptio Setup - AMI

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Enable/Disable SATA Device.

SATA Configuration

SATA Controller(s)

SATA Ports Multiplier

SATA Test Mode

Serial ATA Port 0

Serial ATA Port 1

[Enabled]

[Disabled]

[Disabled]

Empty

Empty

SATA Controller(s)

Enables or disables SATA device.

SATA Ports Multiplier

Enables or disables ports multiplier.

SATA Test Mode

Enables or disables test mode.

Trusted Computing

This section is used to configure Trusted Platform Module (TPM) settings.

Advanced

Version 2.22.1282 Copyright (C) 2022 AMI

Aptio Setup - AMI

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Enable/Disable BIOS
support for security device.
O.S. will not show Security

Device. TCG EFI protocol
and INT1A interface will not
be available.

TPM 2.0 Device Found

Firmware Version:

Vendor:

Security Device Support

Active PCR banks

Available PCR banks

SHA256 PCR Bank

Pending operation

Platform Hierarchy

Storage Hierarchy

Endorsement Hierarchy

7.62

IFX

[Disabled]

SHA256

SHA256

[Enabled]

[None]

[Enabled]

[Enabled]

[Enabled]

Security Device Support

Enables or disables BIOS support for security device. O.S will not show
Security Device. TCG EFI protocol and INT1A interface will not be available.

SHA256 PCR Bank

Enables or disables SHA256 PCR Bank.

«
...
50
51
52
53
54
...
»

Содержание NDiS B338






























































Отзывы:

Нет отзывов