Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
32
NDiS B327 User Manual
Chapter 4: BIOS Setup
PPM Configuration
This section is used to configure the Processor Power Management (PPM)
configuration.
Advanced
Version 2.18.1264. Copyright (C) 2018 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable/Disable Intel SpeedStep
PPM Configuration
EIST
CPU C state Report
[Disabled]
[Disabled]
EIST
Enables or disables Intel
®
SpeedStep.
CPU C state Report
Enables or disables CPU C-State report to OS.
Advanced
Boot
Security
Save
&
Exit
Main
Version 2.18.1264. Copyright (C) 2018 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable/Disable SATA Device
SATA Configuration
SATA Controller
SATA Mode Selection
SATA Port0
Not Present
Port 0
SATA Port1
Not Present
Port 1
[Enabled]
[AHCI]
[Enabled]
[Enabled]
SATA Configuration
This section is used to configure the SATA device option settings.
SATA Controller
Enables or disables the SATA controller.
SATA Mode Selection
Configures the SATA as AHCI mode.
AHCI This option configures the Serial ATA drives to use AHCI
(Advanced Host Controller Interface). AHCI allows the storage
driver to enable the advanced Serial ATA features which will
increase storage performance.
Port 0 and Port 1
Enables or disables SATA port 0 and port 1.
