Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
28
NDiS B327 User Manual
Chapter 4: BIOS Setup
Advanced
The Advanced menu allows you to configure your system for basic operation.
Some entries are defaults required by the system board, while others, if
enabled, will improve the performance of your system or let you set some
features according to your preference.
Setting incorrect field values may cause the system to
malfunction.
Advanced
Security
Boot
Save & Exit
Main
Version 2.18.1264. Copyright (C) 2018 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select AC power state when
power is re-applied after a
power failure.
Restore AC Power Loss(SIO)
[Power On]
Trusted Computing
ACPI Settings
NCT6793D Super IO Configuration
Hardware Monitor
CPU Configuration
PPM Configuration
SATA Configuration
Network Stack Configuration
CSM Configuration
USB Configuration
Restore AC Power Loss(SIO)
Configures the power state when power is re-applied after a power failure.
Trusted Computing
This section is used to configure Trusted Platform Module (TPM) settings.
Advanced
Version 2.18.1264. Copyright (C) 2018 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enables or Disables BIOS
support for security device.
O.S. will not show Security
Device. TCG EFI protocol and
INT1A interface will not be
available.
Configuration
Security Device Support
NO Security Device Found
[Enable]
Security Device Support
Enables or disables BIOS support for security device. O.S will not show
Security Device. TCG EFI protocol and INT1A interface will not be available.
