57
NCr-661-VHA and NCr-662-VHA User Manual
Chapter 2: Camera Configuration
Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
Object Detection Cont.
Zone intrusion:
To create a
Zone intrusion
area for triggering events, on
the live video screen, select the area by clicking the mouse button to specify
the first anchor point, then draw a line to place the second anchor point.
Continue to draw lines for the third and fourth anchor points, then finish
off the selection by clicking the first anchor point. A total of 4 anchor points
can be created. Select the
Inside
or
Outside
option (trigger method) from
the
Direction
drop-down menu. (Note: Object detection function must be
enabled in the
Network Storage
menu to enable event triggers.)
Direction
Configures the direction of counting method.
Count
Displays the counting result.
One way for Line Counting:
There will be two parallel lines (red and green).
Only objects passing the green line first will be calculated and counted. If
the green line is on the right, it will be counted as
Right
in
Count
; if the
green line is on the left, it will be counted as
Left
in
Count
.
Two way for Line Counting:
There will be two parallel lines (both green).
Only objects passing the green line first will be calculated and counted. If
the object passes the right green line first, it will be counted as
Right
in
Count
; if the object passes the left green line first, it will be counted as
Left
in
Count
.
Inside for Zone Counting:
Objects leaving from inside the zone area to the
outside will be calculated as Inside. Objects entering from outside the zone
area to the inside will not be counted as
Inside
or
Outside
.
