56
NCr-661-VHA and NCr-662-VHA User Manual
Chapter 2: Camera Configuration
Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
Event - Object Detection
Object Detection Configurations
Enable
Enables or disables object detection function.
Detect mode
Configures the methods of object detection, the options are
Line counting
,
Line crossing
,
Zone counting
and
Zone intrusion
.
Line counting:
To create a
Line counting
area for calculation (no event
trigger), on the live video screen, select the area by holding down the
mouse button and draw the
Line counting
lines, release the button once
the desired area is covered. Then select the
Two way
or
One way
option
(calculation method) from the
Direction
drop-down menu.
Line crossing:
To create a
Line crossing
area for triggering events, on the
live video screen, select the area by holding down the mouse button and
draw the
Line crossing
lines, release the button once the desired area is
covered. Then select the
Two way
or
One way
option (trigger method)
from the
Direction
drop-down menu. (Note: Object detection function
must be enabled in the
Network Storage
menu to enable event triggers.)
Zone counting:
To create a
Zone counting
area for calculation (no event
trigger), on the live video screen, select the area by clicking the mouse button
to specify the first anchor point, then draw a line to place the second anchor
point. Continue to draw lines for the third and fourth anchor points, then
finish off the selection by clicking the first anchor point. A total of 4 anchor
points can be created. Select the
Inside
or
Outside
option (calculation
method) from the
Direction
drop-down menu.
