Nexcom IWF2220 страница 3 Скачать руководство пользователя

Страница: 3 / 82

User’s Manual

Light Industrial AP

ENGLISH

● Increase the separation between the equipment and receiver.

● Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

● Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the

party

responsible for compliance could void the user’s authority to operate this

equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of

other channels is not possible.

This device and it's antennas(s) must not be co-located or operating in conjunction with any other

antenna or transmitter except in accordance with FCC multi-transmitter product procedures.

This device is going to be operated in 5.15~5.25GHz frequency range, it is restricted in indoor

environment only.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

Содержание IWF2220



















































































Результаты поиска

Содержание IWF2220

Отзывы:

Похожие инструкции для IWF2220

Бренды по названию

Популярные бренды

Nexcom IWF2220, Руководство пользователя

Результаты поиска

Содержание IWF2220

Отзывы:

Похожие инструкции для IWF2220

Бренды по названию

Популярные бренды