Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
6
iNAS 330 Hardware User Manual
Chapter 2: Hardware Installation
C
haPter
2: h
ardware
I
nstallatIon
Installing Hard Disk Drives
The iNAS 330 comes with 3 SATA connectors that can be installed with 3
SATA hard disk drives. Users can manually install these storage drives. Refer
to the following figure and descriptions on how to install or replace the hard
disk drives.
CAUTION!
CAUTION!
CAUTION!
Prior to removing the chassis cover, make sure the unit’s
power is off and disconnected from the power sources to
prevent electric shock or system damage.
1. Remove the four screws on the front panel.
2. Remove the four screws on the rear panel.
3. Remove the top cover of iNAS 330.
4. Remove the four screws on the HDD board. (HDD1/HDD2/HDD3)
5. Install the new drive and secure the enclosure by reversing this procedure.
The same procedure is used to install all drives.
