Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.
44
AIEdge-X
®
500 User Manual
Chapter 4: BIOS Setup
Hardware Monitor
This section is used to monitor hardware status such as temperature, fan
speed and voltages.
CPU temperature
Detects and displays the current CPU temperature.
System temperature
Detects and displays the current system temperature.
CPU FAN and SYSTEM FAN
Detects and displays the current fan speed of the CPU fan and system fan.
Vcore to +3V3
Detects and displays the output voltages.
Advanced
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Smart Fan function setting
Pc Health Status
CPU temperature
System temperature
CPU FAN
SYSTEM FAN
Vcore
+12V
+5V
+3V3
Smart Fan Function
: +53 C
: +39 C
: N/A
: N/A
: +0.803 V
: +12.408 V
: +5.060 V
: +3.388 V
Serial Port 4 Configuration
This section is used to configure serial port 4.
Serial Port
Enables or disables the serial port.
Onboard Serial Port 4 Mode
Select this to change the serial port mode to RS232, RS422 or RS485.
Terminal resistor
Enables or disables the terminal resistor.
Advanced
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM)
Serial Port 4 Configuration
Serial Port
Device Settings
Onboard Serial Port 4 Mode
Terminal resistor
[Enabled]
IO=2E8h; IRQ=11;
[RS485]
[Disabled]
