Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
59
AIEdge-X
®
300 User Manual
Chapter 4: BIOS Setup
Security
Administrator Password
Select this to reconfigure the administrator’s password.
User Password
Select this to reconfigure the user’s password.
Save & Exit
Advanced
Chipset
Security
Boot
Main
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set Administrator Password
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length
3
Maximum length
20
Administrator Password
User Password
Secure Boot
►
Secure Boot
Chipset
Security
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Secure Boot feature is Active
if Secure Boot is Enabled,
Platform Key(PK) is enrolled
and the System is in User mode.
The mode change requires
platform reset
System Mode
Secure Boot
Secure Boot Mode
Restore Factory Keys
Reset To Setup Mode
Key Management
Setup
[Disabled]
Not Active
[Custom]
Secure Boot
Select this to enable or disable Secure Boot. Secure Boot only works when
the system runs in user mode.
Secure Boot Mode
Select this to configure the Secure Boot mode.
Standard
Fixed secure boot policy.
Custom
Secure boot policy variables can be configured by a
physically present user without full authentication.
►
►
►
