Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
41
AIEdge-X
®
300 User Manual
Chapter 3: System Setup
To mount the system on to a wall or some other surface using the two
mounting brackets, please follow the steps below.
1. On each side of the system, align the two retention screw holes in each
bracket with the retention screw holes on the sides of the system.
2. Secure the brackets to the system by inserting two retention screws into
each bracket.
Wall Mounting Instructions
Wall Mount Bracket
Specification of the wall mount screw:
Round Head Screw Long Fei:P6#32TX8L_w/Flat Washer
3. Drill holes in the intended installation surface.
4. Align the mounting holes on the sides of the mounting brackets with the
predrilled holes on the mounting surface.
5. Insert four retention screws, two in each bracket, to secure the system
to the wall.
Fasten screws to mount the
system to the wall
