Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
35
NDiS M422 User Manual
Chapter 4: BIOS Setup
S5 RTC Wake Settings
This section is used to configure S5 RTC Wake Settings.
Exit
Advanced
Chipset
PCIPnP
Security
Main
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or disable System
wake on alarm event. When
enabled, System will wake on the
hr::min::sec specified
Wake system with Fixed Time
[Disabled]
Wake system with Fixed Time
Enables or disables system wake on alarm event. When enabled, the system
will wake on the hr::min::sec specified.
CPU Configuration
This section is used to configure the CPU.
Exit
Advanced
Chipset
PCIPnP
Security
Main
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Disabled for Windows XP
CPU Configuration
Limit CPUID Maximum
[Disabled]
NX
Mode
[Enabled]
SVM
Mode
[Enabled]
C6
Mode
[Disabled]
CPB
Mode
[Auto]
Node 0 Information
Limit CPUID Maximum
The CPUID instruction of some newer CPUs will return a value greater
than 3. The default is Disabled because this problem does not exist in the
Windows series operating systems. If you are using an operating system
other than Windows, this problem may occur. To avoid this problem,
enable this field to limit the return value to 3 or lesser than 3.