Copyright © 2020 NexCOBOT Co., Ltd. All Rights Reserved.
35
NEX 913C User Manual
Chapter 3: BIOS Setup
Trusted Computing
This section is used to configure Trusted Platform Module (TPM) settings.
Advanced
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enables or Disables BIOS
support for security device. O.S.
will not show Security Device.
TCG EFI protocol and INT1A
interface will not be available.
TPM20 Device Found
Firmware Version:
Vendor:
Security Device Support
Active PCR banks
Available PCR banks
SHA-1 PCR Bank
SHA256 PCR Bank
Pending operation
Platform Hierarchy
Storage Hierarchy
Endorsement Hierarchy
TPM2.0 UEFI Spec Version
Physical Presence Spec Version
TPM 20 InterfaceType
Device Select
5.62
IFX
[Enable]
SHA-1,SHA256
SHA-1,SHA256
[Enabled]
[Enabled]
[None]
[Enabled]
[Enabled]
[Enabled]
[TCG_2]
[1.3]
[TIS]
[Auto]
Security Device Support
Enables or disables BIOS support for security device. O.S will not show
Security Device. TCG EFI protocol and INT1A interface will not be available.
SHA-1 PCR Bank
Enables or disables SHA-1 PCR Bank.
SHA256 PCR Bank
Enables or disables SHA256 PCR Bank.
Pending operation
Schedules an operation for the security device.
Platform Hierarchy
Enables or disables platform hierarchy.
Storage Hierarchy
Enables or disables storage hierarchy.
Endorsement Hierarchy
Enables or disables endorsement hierarchy.
TPM2.0 UEFI Spec Version
Configures the TPM2.0 UEFI spec version.
Physical Presence Spec Version
Configures the physical presence spec version.
Device Select
TPM 1.2 will restrict support to TPM 1.2 devices. TPM 2.0 will restrict support
to TPM 2.0 devices. Auto will support both TPM 1.2 and 2.0 devices with
the default set to TPM 2.0 devices if not found, and TPM 1.2 devices will be
enumerated.