Copyright © 2023 NexCOBOT Co., Ltd. All Rights Reserved.
34
NEX 813 User Manual
Chapter 3: BIOS Setup
Max TOLUD
Configures the maximum value of TOLUD.
Primary Display
Select which of IGFX/PEG/PCI graphics device should be primary display or
select 5G for switchable GFx.
System Agent (SA) Configuration
Chipset
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Maximum Value of TOLUD.
Dynamic assignment would
adjust TOLUD automatically
based on largest MMIO length
of installed graphic controller
Memory Configuration
Memory Frequency
Total Memory
Channel 0 Slot 0
Channel 0 Slot 1
Size
Number of Ranks
Manufacturer
Channel 1 Slot 0
Channel 1 Slot 1
Max TOLUD
Primary Display
Primary IGFX Boot Display
Secondary IGFX Boot Display
PCIEX16 Gen Speed
2400 MHz
16384 MB
Not Populated/Disabled
Populated & Enabled
16384 MB (DDR4)
2
Unknown
Not Populated/ Disabled
Not Populated/ Disabled
(Dynamic)
[Auto]
[HDMI 1]
[HDMI 2]
[Auto]
Primary IGFX Boot Display
Select the video device which will be activated during POST. Has no effect
if external graphics is present. Secondary boot display selection will appear
based on your selection. VGA modes will be supported only on primary
display.
PCIEX16_1 Gen Speed
Configures the maximum link speed of the PEG device.