Using a sharp hobby knife, cut away the covering
inside the lines. Not to cut into the wood.
CA
Thin CA
Cut away only
the covering
Insert the horizontal stabilizer into
the slot on the fuselage, if necessary,
use sander to widen the slot to make
this easier.
If the fit is overly tight, it may be necessary
to lightly sand the top edge of the slot.
Remove the left and right elevator out of the
horizontal stabilizer before insert the horizontal
stabilizer.
10- Air scoop
continued
YAK-9
11- Horizontal stabilizer
YAK-9
Note: The hinges are glued to the
elevator only.
Be cautious
not to cut into the wood
, this will
weaken the structure
.
11
