! Securely glue together If coming off during
fly, you lose control of your air plane.
Install the horizontal stabilizer into the fuselage and
adust the alignment as described in steep 4B. Secure
the horizontal stabilizer in place using CA glue.
6A
B
B’
B=B’
Aluminum wing joiner
Apply a thin layer of machine oil or petroleum jelly
to only the pivot point of the hinges on the elevator,
then push the elevator and its hinges into the hinge
slots in the trailing edge of the horizontal stabilizer.
There should be a minimal hinge gap.
When satisfied with the and alignment, hinge the
elevator to the horizontal stabilizer using CA glue.
Hinge
Petroleum jelly
STABILIZER
6B
6C
Note: the hole on the center of
the stabilizer must be coincidental
with the center line of the fuselage.
Control horn
...........2
Note: The slots for the control horn
installation are pre- cut at factory.
Cut away only
the covering.
6
CA
7
