Nexa Royal Air Force Supermarine Spitfire, Инструкция по эксплуатации

Страница: 3 / 27

A
Carefully remove the engine mount beams
and drill a 6mm hole through the fire-wall
at each of the four marks made above (1C)
Reposition the engine mount beams on to the fire-wall
and secure them with four 4x25mm screw
.
Insert the blind-nut onto each
of the four holes make above
. .
...................4
....................4
4x25mm screw - washer
Blind-nut
Push left (or right) the magnetic fuel tank
hatch and full it out of the fuselage.
! Align the mark on both engine mount
beams with the mark on the fuselage
Attach the engine mount beams onto the fire-wall
so the distance between of two engine mount beams
is “A”,and B=B’ as show.
Secure the engine mount beams onto the fire-wall
with
litter CA glue .
Using a pencil or felt tipped pen, mark
the fire wall where the four holes are to
be drilled(1B))
6mm
INSTRUCTION MANUAL / SPITFIRE
Engine installation
B
B’
Litter thin CA
3