Elevator servo (L)
Elevator servo (R)
Rudder servo
Open the rear door (on the
right side of the fuselage only)
Install the servos as show
Magnetic piece
To right elevator control horn
To left elevator control horn
To ruder control horn
OPEN
14- Servo
SIDE-VIEW /
Seitenansicht
5x80mm screw
....4
5mm nut
........12
5mm washer
..........8
5mm
Using a aluminum motor mounting plate as a template,
mark the fire-wall where the four holes are to be drilled.
Remove the aluminum motor mounting plate and
drill a 5mm hole through the plywood at each of the
four marks marked.
Note: The aluminum motor mounting and screws
included with the engine.
5mm
X
The long of the aluminum tubes are the same.
Note: The aluminum tube not include.
152mm
15- Engine / Motor
