Nexa NE-1 NAVY CUB, Инструкция по эксплуатации

Страница: 12 / 20

Using a aluminum motor mounting plate as a template, mark the fire-wall
where the four holes are to be drilled (1).
Remove the aluminum motor mounting plate and
drill a 5mm hole through the plywood at each of the
four marks marked (2).
Note: The aluminum motor mounting and screws
included with the motor.
4
1
2
CA
3
CA
B
B=150mm
ELECTRIC MOTOR and COWLING NAVY CUB section 13
Cut a hole on the fire-wall to you
can move the Li-po battery to the
nose of the model, this helps the
easy to balance your model.
Li-po battery